UF250APA Series
| Frame/Housing: | Aluminum die-casting |
| Impeller: | Plastic or steel |
| Bearing System: | Ball bearing |
| Motor: | Shaded pole or capacitor start-run |
| Protection: | Impedance-Protected or Thermally-Protected or Electronically-Protected |
| Insulation Resistance: | Above 100MΩ, DC500V. |
| Dielectric withstand voltage: | AC 1,500V (50/60Hz) one minute |
| Life Expectancy: | Ball bearing: Over 40,000 hr. (at 40℃) |
| Safety Approval: | CUL, CE, TUV, either UL or ETL. |
Introduction
| Model | UF250APA11H1C2A | UF250APA23H1C2A |
| Rated Voltage | 115 V | 230 V |
| Frequency | 50/60 Hz | 50/60 Hz |
| Input Power | 170/240 W | 170/240 W |
| Rated Current | 1.5/2.1 A | 0.77/1 A |
| Locked Current | 3.1/3 A | 1.57/1.52 A |
| Speed | 2600/2700 RPM | 2600/2700 RPM |
| Maximum Air Flow | 22/24 m3/min. | 22/24 m3/min. |
| Maximum Air Flow | 770/850 CFM | 770/850 CFM |
| Maximum Pressure | 56/74 mmH2O | 56/74 mmH2O |
| Maximum Pressure | 2.2/2.9 InchH2O | 2.2/2.9 InchH2O |
| Noise | 75/76 dB | 75/76 dB |
| Weights | 3.1 kg | 3.1 kg |
* Other dimensions are available on request *
