UF225(85)APA Series
| Frame/Housing: | Aluminum die-casting |
| Impeller: | Plastic or steel |
| Bearing System: | Ball bearing |
| Motor: | Shaded pole or capacitor start-run |
| Protection: | Impedance-Protected or Thermally-Protected or Electronically-Protected |
| Insulation Resistance: | Above 100MΩ, DC500V. |
| Dielectric withstand voltage: | AC 1,500V (50/60Hz) one minute |
| Life Expectancy: | Ball bearing: Over 40,000 hr. (at 40℃) |
| Safety Approval: | CUL, CE, TUV, either UL or ETL. |
Introduction
| Model | UF225(85)APA11H1C2A | UF225(85)APA23H1C2A |
| Rated Voltage | 115 V | 230 V |
| Frequency | 50/60 Hz | 50/60 Hz |
| Input Power | 115/135 W | 115/135 W |
| Rated Current | 1.15/1.20 A | 0.57/0.60 A |
| Locked Current | 2.22/2.30 A | 1.14/1.15 A |
| Speed | 2700/3000 RPM | 2700/3000 RPM |
| Maximum Air Flow | 17.5/19.2 m3/min. | 17.5/19.2 m3/min. |
| Maximum Air Flow | 618/680 CFM | 618/680 CFM |
| Maximum Pressure | 46/64 mmH2O | 46/64 mmH2O |
| Maximum Pressure | 1.8/2.5 InchH2O | 1.8/2.5 InchH2O |
| Noise | 71/75 dB | 71/75 dB |
| Weights | 2.3 kg | 2.3 kg |
* Other dimensions are available on request *
