UF225(69)APA Series
| Frame/Housing: | Aluminum die-casting |
| Impeller: | Plastic or steel |
| Bearing System: | Ball bearing |
| Motor: | Shaded pole or capacitor start-run |
| Protection: | Impedance-Protected or Thermally-Protected or Electronically-Protected |
| Insulation Resistance: | Above 100MΩ, DC500V. |
| Dielectric withstand voltage: | AC 1,500V (50/60Hz) one minute |
| Life Expectancy: | Ball bearing: Over 40,000 hr. (at 40℃) |
| Safety Approval: | CUL, CE, TUV, either UL or ETL. |
Introduction
| Model | UF225(69)APA11H1C2A | UF225(69)APA23H1C2A |
| Rated Voltage | 115 V | 230 V |
| Frequency | 50/60 Hz | 50/60 Hz |
| Input Power | 105/125 W | 105/125 W |
| Rated Current | 1.11/1.12 A | 0.54/0.56 A |
| Locked Current | 2.22/2.30 A | 1.14/1.15 A |
| Speed | 2650/2950 RPM | 2650/2950 RPM |
| Maximum Air Flow | 14.2/15.6 m3/min. | 14.2/15.6 m3/min. |
| Maximum Air Flow | 500/550 CFM | 500/550 CFM |
| Maximum Pressure | 46/58 mmH2O | 46/58 mmH2O |
| Maximum Pressure | 1.8/2.3 InchH2O | 1.8/2.3 InchH2O |
| Noise | 70/72 dB | 70/72 dB |
| Weights | 2.3 kg | 2.3 kg |
* Other dimensions are available on request *
